MIG/MAG RANGE MIG 280 DOUBLE PULSED Stayer

Product advantages :

IGBT Inverter 280A SYNERGIC Aluminium, steel and copper automatic 4-groove mechanism and a quadruple roller Three-phase professional equipment for MIG, MMA and TIG welding Synergic system suitable for all kind of inox and carbon steels, magnesium / silicon aluminium and copper welding Includes specific setting modes for MMA coated electrode, +ATC simple / double pulse, Fab and manual mode. Includes 2T, 4T, 4TH and Spot sequence modes Includes optimized parameters for wire of 0.8, 1.0 and 1.2mm Includes Hot Start and Arc Force external regulation for MMA welding Includes two sets of 25mm2 torches. A short one for aluminium and a longer one for steel Includes a 4-groove drive, including a quadruple “U”-shaped roller specially for aluminium and a “V”-shaped specially for steel A complete, intuitive and easy-setting control panel Advanced modular electronics managed by three microprocessors for a longer life and a simple technical service Easy carriage and storage: compact unit (60x62x30cm) and low mass Low consumption: maximum of 15A per phase Electrical generator-ready.

Standard equipment :

Power cable – 2.6m x 1.5 mm² Earth clamp cable – 2m x 25mm² Electrode holder cable – 3m x 25 mm² Torch for INNOTEC 24 aluminium – 2m x 25 mm² Torch for INNOEC 24 steel – 4m x 25 mm² Cylinder support tray – 29 x 27,5 cm Cylinder safety chain – 90 cm Transport wheels – 7 / 20 cm 1 / 1.2mm “U” rollers – 4 Uds 0.8 / 1.0mm “V” rollers – 2 Uds 1.2 / 1.6mm “V” rollers -2 Uds Flat rollers – 2 Uds 0.8mm contact tip for steel -2 Uds 1.0mm contact tip for steel – 2 Uds 1.2mm contact tip for steel – 2 Uds 1.6mm contact tip for steel – 2 Uds 1.0mm contact tip for aluminium – 2 Uds 1.2mm contact tip for aluminium – 2 Uds

All accessories available in our catalogue